=====================
#opnfv-copper: Copper
=====================


Meeting started by bryan_att at 15:00:36 UTC.  The full logs are
available at
http://ircbot.wl.linuxfoundation.org/meetings/opnfv-copper/2015/opnfv-copper.2015-10-07-15.00.log.html
.



Meeting summary
---------------

* roll call  (bryan_att, 15:01:22)
  * Bryan Sullivan  (bryan_att, 15:01:30)

* Agenda  (bryan_att, 15:09:55)
  * per
    http://lists.opnfv.org/pipermail/opnfv-tech-discuss/2015-September/005504.html
    (bryan_att, 15:10:32)

* Sandbox install in Spirent lab  (bryan_att, 15:11:53)
  * This week I will start the effort to get the single-NIC non-HA
    Foreman install running in the Spirent lab. I will need 3 VMs;
    jumphost, controller, and compute  (bryan_att, 15:13:48)
  * the jumphost will need 1 NIC, 8  GB RAM, 250GB HDD  (bryan_att,
    15:14:32)
  * the controller and compute hosts will need 1 NIC, 16GB RAM, 250GB
    HDD  (bryan_att, 15:15:21)
  * 250GB HDD is assumed to be enough for now but may grow  (bryan_att,
    15:15:50)
  * the controller will also need a connection to external network as
    shown in https://wiki.opnfv.org/copper/academy  (bryan_att,
    15:16:41)
  * I will setup the bridge as described on that page, to NAT to an IP
    with internet access  (bryan_att, 15:17:50)
  * In addition to what is described in
    https://wiki.opnfv.org/copper/academy/foreman, I will add GUI
    support so that I can browse to the OpenStack/ODL and Foreman UIs,
    as well as any UI provided by apps on the compute node. So the
    jumphost will need remote desktop access support (e.g. VNC).
    (bryan_att, 15:20:47)
  * once this is installed and verified per
    https://wiki.opnfv.org/copper/academy/foreman/verify, I will proceed
    to installing Congress (next topic)  (bryan_att, 15:21:51)

* Congress Install  (bryan_att, 15:22:05)
  * I have a Congress Ansible installer script (a little dated perhaps)
    provided by VMWare  (bryan_att, 15:22:43)
  * I will post it to the Copper git  (bryan_att, 15:23:20)
  * git review is at https://gerrit.opnfv.org/gerrit/#/c/2311/
    (bryan_att, 16:53:24)
  * I will work on updating it as needed to install congress. in the
    meantime +1's will be appreciated  (bryan_att, 16:54:03)
  * I added iben and zhipeng as reviewers  (bryan_att, 16:55:52)

* next steps  (bryan_att, 16:56:17)
  * per
    http://lists.opnfv.org/pipermail/opnfv-tech-discuss/2015-September/005504.html
    (bryan_att, 16:56:34)
  * we need "Examples leveraging the basic mechanisms supported by OPNFV
    components for VNF and service configuration, and policy control",
    such as Heat etc as described in
    http://artifacts.opnfv.org/copper/design_docs/requirements.html#resource-requirements
    (bryan_att, 16:58:01)
  * and "VNF configuration: Heat templates for sample VNFs to be
    instantiated" in the todo list from the email  (bryan_att, 16:58:55)
  * That's all for now. I will send an email to the list with these
    items for followup as agreed earlier with zhipeng  (bryan_att,
    16:59:48)



Meeting ended at 16:59:51 UTC.



People present (lines said)
---------------------------

* bryan_att (31)
* collabot (3)



Generated by `MeetBot`_ 0.1.4